Turntable Turning track

Brand
Lenz
product type
track
technical & model details
gauge	O gauge
Age notice	not suitable under 14 years

Model: 0 Gauge. The turntable has a total of 32 exits, 31 of which can be used for rail connections. The first exit is used by the drive and therefore cannot be used as a rail connection. The turntable comes with 8 pieces of track with which you can equip four exits. Further pieces of track (8 pieces in each bag) are available under item no. 49020 available. The outlets have an angle of 11.25 ° to each other. This angle corresponds to that of the switches in the Lenz track system. The outer diameter is 586 mm, this is the length of a double crossing switch (DKW) of the Lenz 0 track system. Due to the flat construction, the turntable is at the same height as all other tracks and has no installation depth.
The turntable can be controlled digitally via the Digital plus by Lenz system or any other digital control that conforms to the DCC standard. The control of the rotating track in the DCC system is similar to the switching of points. Each exit has its own turnout address together with its directly opposite exit. So 16 turnout addresses are used for the 32 exits of the turntable. By selecting this turnout address on the digital control, you determine which exit from the turntable should be approached. You can also determine the direction of rotation. To turn, you operate the turntable like a turnout: Select the address on the speed controller, press the "+" button to turn clockwise, the "-" button to turn counterclockwise, the turntable moves to the selected exit and stops automatically. The reverse loop problem known with turntables has also been solved, more information can be found in the operating instructions. Four outlets are included in the scope of delivery, another four outlets are available as accessories.