Standard Point Motor Decoder W/CDU 3x

Item no.:  Gaugemaster-BPDCC81
Standard Point Motor Decoder W/CDU 3x - Image 1
Gaugemaster
Gaugemaster
more articles from Gaugemaster
64,90 €
incl. VAT and excl. shipping
not suitable under 14 years
Total amount: {{ totalPrice }} €
pieces
currently not available
This item notice Article is noted
Availability: (Delivery time: )
  • Description
Brand
Gaugemaster
product type
digital & layout control
technical & model details
Age notice not suitable under 14 years

Simple point motor decoder for Standard solenoid point motors, 2 wire main track or bus connection minimize wiring. The super easy learning decoder requires no special programing when addressing. This decoder features an easy to use screw terminal block to insert your wires into. There is also a 3 pin harnes to attaches to the Surface Mounted Point Motor but with simple modification it can be fitted to other Solenoid Point Motors. The small switch on the side of the board is for setting the address of the decoder and then operating the point motor, simply set the switch to the SET mode, give the decoder an address from your DCC controller and set the switch back to RUN. It is that easy.

Gaugemaster offers the model railroader suitable accessories, such as point machines and tools. Above all, the English 00 gauge is represented. In 1977, the company was able to establish itself for the first time as a manufacturer, in which you brought your Gaugemaster control unit on the market. Since then, new products are constantly designed and produced.