Decoder LokSound 5 Nano DCC Leerdecoder PluX16

new item
new item	Neuer Artikel, derzeit noch nicht lieferbar. Bitte kombinieren Sie diesen Artikel nicht mit lieferbaren Artikeln im gleichen Warenkorb!
Brand
ESU
product type
digital & layout control
technical & model details
scale	neutral
gauge	neutral
length (mm)	21
width (mm)	11
height (mm)	6
Age notice	not suitable under 14 years

LokSound 5 Nano DCC empty decoder PluX16 interface.
With the LokSound 5 Nano DCC, ESU has managed to develop an even smaller LokSound decoder: At just 21 mm x 8.5 mm x 5.3 mm, it is the smallest LokSound decoder with PluX16 interface that we have ever built. It should therefore really be used in all vehicles with nominal sizes N and TT. The LokSound 5 Nano DCC decoder is a pure DCC decoder with open cable ends for free wiring and is supplied with an 11 x 15 mm "sugar cube" speaker and a sound capsule kit.
The LokSound 5 Nano is a "pure" DCC decoder. 14 to 128 speed levels are as natural as 2 and 4 digit addresses. Up to 32 functions can be triggered. Thanks to Rail-ComPlus®, the decoders log on fully automatically to a suitable digital control center.
It controls all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable control centers. There are auxiliary registers for control panels that can only program CVs from 1-255.
The LokSound 5 Nano DCC decoder recognizes the Märklin® braking distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with direct voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. The LokSound 5 Nano DCC can be used on analogue DC railways.
The decoder switches between the operating modes fully automatically “on the fly”. Most of the time nothing needs to be adjusted.

Sound:
The LokSound 5 Nano DCC decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and offers HiFi quality on your system. There is practically no audible difference from the original. A Class-D audio power amplifier with up to 3W output power drives the speakers, which can have an impedance of between 4 ohms and 32 ohms. A 128 Mbit sound memory ensures enough capacity. All individual sounds can be individually adjusted in volume. The super-flexible sound engine without a rigid schedule allows the exact simulation of all conceivable rail vehicles.

Features:
Despite its small size, the LokSound 5 Nano DCC has 6 amplified function outputs and a logic level output as a soldering pad. All important lighting functions are available. The brightness of each output can be adjusted separately. The decoder masters automatic pressing and releasing when uncoupling for ROCO®, Krois® and Märklin-Telex® couplings.

Motor control:
The motor control of the LokSound 5 Nano DCC has a variably adjustable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially with bell-armature motors - the typical “humming” is a thing of the past. The load control can also be adapted to difficult cases with up to 10 CVs. The unique “Autotune” function enables the decoder to be automatically calibrated to the motor. The LokSound 5 Nano DCC decoder delivers up to 0.75A motor current.

Protection:
Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.