Car System Expansion module

The expansion module is connected to the basic module (interface) via LocoNet in order to have more inputs and outputs for stop points, junctions, traffic lights, lighting, sensors and parking spaces for more complex systems. Several expansion modules can be connected in series. 11 inputs for sensors, 12 outputs for functional elements.
The expansion module in Car System Digital operation:
The expansion module is connected to the digital master via a LocoNet cable and is fully automatically recognized as a hardware component by the Car System Digital software. With its 11 inputs and 12 outputs, it allows you to set up and control light signals integrated on the route, such as: B. physical traffic lights, LEDs or lamps, car system control components, such as. B. junctions, parking spaces or sensors and from other consumers. After the route has been virtually recorded, these are visible with a digital address in the system window. The connection is made to 16 V AC voltage. Several expansion modules can be connected one behind the other. The expansion module can also be connected directly to a LocoNet-capable digital control center (e.g. Uhlenbrock Intellibox II) and operated via it.