PowerPack Maxi energy storage for V4.0 L and 5 L

Item no.:  ESU-54672
PowerPack Maxi energy storage for V4.0 L and 5 L - Image 1
ESU
ESU
more articles from ESU
59,95 €
incl. VAT and excl. shipping
not suitable under 14 years
Total amount: {{ totalPrice }} €
pieces
currently not available
This item notice Article is noted
Availability: (Delivery time: )
  • Description
Brand
ESU
product type
digital & layout control
lighting, spare parts & service
technical & model details
gauge neutral
Age notice not suitable under 14 years

The new ESU PowerPack Maxi has been developed as a powerful addition to the LokSound L V4.0 / LokSound 5 L, but can also - if space is available - on all LokPilot V4.0, LokSound V4.0, LokSound V4.0 M4 and LokSound 5 and reliably supplies your locomotive with energy when driving over dirt and long routes. Two energy storage devices (5 Farad capacity each) buffer both the sound and lights and engine functions, allowing your models to continue without power for up to 3 seconds, depending on power consumption. The PowerPack Maxi has an integrated charging circuit and is controlled by the decoder. It can therefore remain in the locomotive while programming. The charging current is also limited to prevent excessive load on your booster, if several models are in use. The buffer time can be limited by means of a CV decoder side, so that red signals also lead to an accurate signal. However, the size of the PowerPack Maxi of approx. 27.5 mm x 15.7 mm x 13 mm must be taken into account during installation. Between the decoder and PowerPack Maxi a 3-pin cable connection is required. The cable is already soldered to the PowerPack Maxi, but must be soldered on the decoder side itself. Please note that the PowerPack automatically switches off automatically in analog mode: buffering is therefore not possible in analog mode.

matching products
ESU has existed for over 25 years and is only known to most model railroaders because of its innovative digital technology (decoder and system control), but since 2012 also because of suitable, innovative and realistic implementations of locomotives, passenger cars and freight cars. The digital center ECoS, LokPilot 5, LokSound 5 and the Nano decoders are the distance horses in the ESU range. Modellbahn Union also cooperates very closely with ESU and has already had exclusive sound models implemented for its own products as well as remaining stock. At the same time, further exclusive models in the rolling area are sought, as well as close cooperation in the implementation of Modellbahn Union's own products.