Item no.: Zimo-ADAMTC15
- Description
| Brand | |
| Zimo | not suitable under 14 years. |
| product type | |
| digital & layout control | |
| technical & model details | |
| Age notice | not suitable under 14 years |
Adapter board for 21MTC Decoder; The Decoder is plugged into the pin header of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable. The AdamtC adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it. Size: 44 x 26.5 x 6 mm.
The adapter board Adamtc CAN be used along with all 21MTC Decoders, which are a C-type - therefore, MX631C, MX634C, MX638C, MX636C, MX644C, ... and follow-up types - are used.
Not allowed is the use of MX631D, MX634D, MX636D, MX638D and MX644D.
For the plugged Decoders, the values ??of the supported energy stores change to 16 V / max. 6800 ?F, but only when the energy store is connected to the appropriate solder pad / screw terminals of the AdamtC / Adamkl board.
The company Zimo Elektronik was founded in Vienna in 1980. From the beginning, Zimo was engaged in the development and production of digital control systems for model railways. With the predecessor company "ZIEGLER & MAIR", the first systems were already sold in 1979. In the 1980s to 1990s many trend-setting production lines were introduced such as the digital systems "M1000" and "M2000" as well as the decoders "M4000", "M4001" and the operating controllers "M5000". From 1996 onwards, Zimo products were designed for the DCC rail signal standardised by the NMRA as well as for the MM system. In the following years, the production capacity of the company was increased and the product range expanded.