Item no.: DH-FH22A
So you save at our shop:4 %
If you purchase a large amount of items you will receive the following discounts:
| Quantity | Discount | |
|---|---|---|
| 3 | 2,79 % |
- Description
- Download
| Brand | |
| Doehler & Haass | |
| product type | |
| digital & layout control | |
| technical & model details | |
| Age notice | not suitable under 14 years |
Vehicle function decoder 2.0 A
Operating mode SX1, SX2, DCC, MM, DC-analog, AC-analog
Dimensions [mm] 16.1 * 15.8 * 3.3
Total load capacity 2.0 A
Max. Driving voltage 30 V
Switching voltage for AC analog max. 45 V peak = 30 V eff.
LV, LR (dimmable) 150 mA each
AUX1, AUX2 (dimmable) 300 mA each
AUX3, AUX4 1.0 A each
AUX5, AUX6 unamplified
with SUSI interface (if AUX5 / AUX6 deactivated)
Product features and functions
For optional operation with conventional direct current driving device, digital systems according to SelecTRIX 1 and 2 or according to NMRA standard (DCC).
The switchover between analog and digital operation takes place automatically
In digital mode, the last programmed system is used (it is not switched automatically!)
SelecTRIX 1 31 speed steps, 100 addresses
SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
DCC Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
Internally 127 speed steps
Block section operation with simple diodes in digital operation
Light and function outputs (partially) dimmable and can be activated analogously
Shunting gear
Light and track connections can be exchanged electronically
All function outputs freely programmable
Temperature protection
Reset function for DCC and SX2
Update capability of the decoder
The update (firmware download from the Internet is free) is possible when the decoder is installed on the track (no need to open the vehicle) and is carried out either via the FCC digital center or the programmer.
The vehicle function decoder FH22A supports braking with asymmetrical digital voltage (four diodes in series and one anti-parallel diode, Lenz ABC), slow travel (with suitable brake modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).
Doehler & Haass (D&H) has dedicated itself to the development, production and sale of components for the digital control of model railway systems since 1975.
Doehler & Haass products support all common model railway standards. Well-known manufacturers also use D&H products to build them directly into their own components. Product development continues to offer customers a constantly growing range of products that meet all requirements. As a special service, Doehler & Haass has been offering free software updates and downloads of sound projects from renowned sound design studios for many years, which are also free of charge. Almost all of the system components supplied are manufactured in Germany. Particular attention is paid to the use of high-quality materials and elaborate workmanship in order to guarantee a particularly high level of reliability. All of this at a very attractive price!