Decoder SwitchPilot 3 Plus

Item no.:  ESU-51831
Decoder SwitchPilot 3 Plus - Image 1
71,99
incl. VAT and excl. shipping
not suitable under 14 years
Total amount: {{ totalPrice }}
pieces
currently not available
This item notice Article is noted
Availability: (Delivery time: )
  • Description
Brand
ESU
product type
digital & layout control
technical & model details
gauge neutral
Age notice not suitable under 14 years

SwitchPilot 3 Plus decoders are optimized for stationary use on your layout and can switch conventional double-coil turnout drives, light signals, magnetic decouplers, light bulbs or other stationary consumers. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.
Operating modes
The SwitchPilot 3 Plus is multi-protocol capable and can be used with central units based on the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-capable central units. The configuration can take place on the main track as well as on the programming track. Thanks to RailCom®, CVs can also be read out. The SwitchPilot 3 Plus can be supplied either directly from the digital system or from an external DC or AC voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 output pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired application: In pulse mode, the output is switched on as soon as a switching command is received. As the output switches off again automatically as soon as a time stored in the decoder has been reached, solenoid accessories are prevented from burning through. In momentary operation (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for point machines with limit switches or for decoupling tracks. In bistable continuous operation (k84-compatible) the two outputs are switched on and off alternately: When you press the first button (red) on the control panel, output Out A is switched on. It remains active until output Out B of the same output group is activated by pressing the assigned button (green). Out A and Out B behave like a toggle switch. In alternating flashing mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The alternating flasher is started with the “Straight / Green” command of the assigned button and stopped again with the “Branch / Red” command. Optionally, the output can also be slowly faded in and out (so-called “zoom” for light bulb simulation).
Setting
The SwitchPilot 3 Plus can be flexibly set either on the programming track with DCC centers or on the main track with POM ("Programming on Main") or can also be read out using RailCom® CVs. If required, he can also learn the addresses directly via a programming button. The easiest way to do this is of course with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed if desired. "Programming" with the help of your control center is not necessary. It really doesn't get any easier than that. The ESU LokProgrammer can be used for firmware updates.
Protection
As with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are largely protected against overload. We want you to enjoy your decoder for as long as possible.

matching products
ESU has existed for over 25 years and is only known to most model railroaders because of its innovative digital technology (decoder and system control), but since 2012 also because of suitable, innovative and realistic implementations of locomotives, passenger cars and freight cars. The digital center ECoS, LokPilot 5, LokSound 5 and the Nano decoders are the distance horses in the ESU range. Modellbahn Union also cooperates very closely with ESU and has already had exclusive sound models implemented for its own products as well as remaining stock. At the same time, further exclusive models in the rolling area are sought, as well as close cooperation in the implementation of Modellbahn Union's own products.