Item no.: ESU-59128
So you save at our shop:10 %
- Description
| Brand | |
| ESU | |
| product type | |
| digital & layout control | |
| technical & model details | |
| gauge | neutral |
| Age notice | not suitable under 14 years |
The LokPilot 5 Fx micro DCC are versatile function decoders with a Next18 interface on a base area of ??13.0mm x 9.2mm. They are used in all vehicles of nominal sizes N to H0 that do not have an engine output, but should still be able to switch light effects.
Operating modes
The LokPilot 5 Fx micro DCC is a "thoroughbred" DCC decoder. 14 to 128 speed steps are as natural as 2 and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.
It masters all DCC programming modes and, thanks to RailCom®, the CV values ??on the main track can be read out with suitable central units. Auxiliary registers exist for central units that can only program CVs from 1-255.
The LokPilot 5 Fx micro DCC decoder can be used on analogue direct current railways.
The decoder switches between the operating modes fully automatically "on-the-fly". Usually nothing needs to be adjusted.
Features
The LokPilot 5 Fx micro DCC has been equipped with a surprising number of function outputs. There are 6 amplified function outputs, each with an output current of 180 mA, as well as two logic level outputs for servos or Susi. The brightness of each output can be adjusted separately.
Teamwork
The LokPilot 5 Fx micro DCC is designed to interact with the LokSound 5 and LokPilot 5 decoders: For example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 decoder and the control car with a LokPilot 5 Fx DCC. Assuming the same address, both behave absolutely identically. The identical arrangement of the CVs makes it easier to coordinate the two decoders.
Operational safety
On request, a PowerPack can be connected to the LokPilot 5 Fx micro DCC to bridge dirty rail sections.
Protection
Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.
matching products
ESU has existed for over 25 years and is only known to most model railroaders because of its innovative digital technology (decoder and system control), but since 2012 also because of suitable, innovative and realistic implementations of locomotives, passenger cars and freight cars.
The digital center ECoS, LokPilot 5, LokSound 5 and the Nano decoders are the distance horses in the ESU range. Modellbahn Union also cooperates very closely with ESU and has already had exclusive sound models implemented for its own products as well as remaining stock. At the same time, further exclusive models in the rolling area are sought, as well as close cooperation in the implementation of Modellbahn Union's own products.