Decoder LokPilot 5 21MTC MKL DCC/MM/SX/M4

Item no.:  ESU-59649
Decoder LokPilot 5 21MTC MKL DCC/MM/SX/M4 - Image 1
former RRP 2) : 42,40 (incl. VAT)
So you save at our shop:10 %4,24
38,16
incl. VAT and excl. shipping
not suitable under 14 years
Total amount: {{ totalPrice }}
pieces
currently not available
This item notice Article is noted
Availability: (Delivery time: )
  • Description
Brand
ESU
product type
digital & layout control
technical & model details
gauge HO, O gauge
Age notice not suitable under 14 years

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. Operating modes: The LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ??on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255. Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are offered here. The LokPilot 5 decoder recognizes the Märklin® braking distances as well as the ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. The LokPilot 5 decoder can be used on analog DC and AC railways. The decoder switches between the operating modes fully automatically "on-the-fly". Usually nothing needs to be set. Functions: We know that you want your locomotives to be as realistic as possible. Therefore, we packed the LokPilot 5 with function outputs. Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings. Engine control: The engine control of the LokPilot 5 has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially with bell-armature motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors. Operational safety: If required, a PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections. Protection: Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.

matching products
ESU has existed for over 25 years and is only known to most model railroaders because of its innovative digital technology (decoder and system control), but since 2012 also because of suitable, innovative and realistic implementations of locomotives, passenger cars and freight cars. The digital center ECoS, LokPilot 5, LokSound 5 and the Nano decoders are the distance horses in the ESU range. Modellbahn Union also cooperates very closely with ESU and has already had exclusive sound models implemented for its own products as well as remaining stock. At the same time, further exclusive models in the rolling area are sought, as well as close cooperation in the implementation of Modellbahn Union's own products.